User's Manual

AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
78 Doc. No. 00071UM Rev. 3.4 © Axell Wireless Ltd
7.3.1 Control Module LEDs
The Control Module has four LEDs which give information regarding the status of the
MBF-40.
The two LEDs “Modem Power” and “Modem Status” do not fill any function and can
be disregarded.
Blue LED - Login
Quick flash
Control Module switched on, someone logged in locally
and/or remotely
Off (except for a quick flash
every 10th second)
Control Module switched on, no one logged in
Off (permanent) Control Module switched OFF
Red LED - Status
Quick flash
Control Module switched on, one or more errors/alarms
detected
Off (except for a quick flash
every 10th second)
Control Module switched on, status OK
Off (permanent) Control Module switched off
7.3.2 F/O Converter LEDs
NOTE: MIMO models include two optic converters with separate status LEDs.
There are 6 LEDs on the module to indicate the status.
LED 1, Power, Green
On Unit is powered on
Off Unit has no power
LED 2, Error, Red
On Error detected
Off
No error
LED 3, UL Data, Yellow
On Communication is ongoing in the uplink direction
Off No communication
LED 4, DL Data, Yellow
On Communication is ongoing in the downlink direction
Off No communication
LED 5, Opto Rx, Green
On Received RF signal on Fiber channel is above threshold
Off Input level below threshold
LED 6, Opto Tx, Green
On Transmitted RF signal on Fiber channel is above threshold
Off Output level below threshold
Modem Status
Modem Power
Status
Login
PWR
ERR
UL Data
DL Data
Opto Rx
Opto Tx