User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 Repeater Installation
- 3.1 Location Criteria
- 3.2 Standard Repeater Installation
- 3.3 Repeater with Fan Hood Installation
- 3.4 Five-Band System Installation
- 3.5 Grounding
- 3.6 Ensure Good EMV Protection
- 3.7 Fiber Optic Connection
- 3.8 External Alarm and Relay Connections
- 3.9 Power and Backup Battery
- 3.10 Power ON
- 3.11 Closing and Securing the Repeater
- 4 Opening a Session and Navigating GUI
- 5 MBF-40 Commissioning
- 6 MBF-40 Full GUI Description
- 7 Monitoring and Fault Sourcing
- 8 Maintenance
- Appendix A - US Specifications
- Appendix B - Canada Specifications
- Appendix C – F/O Cleaning Procedure
AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
74 Doc. No. 00071UM Rev. 3.4 © Axell Wireless Ltd
7.1.2 Detailed view of the MBF-40
Figure 7-3: MBF-40 Repeater Status
Indicator Description
Band Overall band status.
Radio System Identifier Band(s) and technologies in use
Comm DL/UL status
Power Power indication
Radio Board Firmware Firmware related error
Radio Board Temp Radio board temperature indicator
Amplifier Power Turn amp. on/off.
Attenuation Use to define DL/UL RF attenuation level per band
Amplifier Amplifier status
Saturation Saturation level status
Power Level Power supply status
Input/Output Input/output power levels
Comm Communication status
Temperature Temperature level and status indicator
Condition Signal conditioning status
Fatal Condition Critical condition indicator (RED = fault)