User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 Repeater Installation
- 3.1 Location Criteria
- 3.2 Standard Repeater Installation
- 3.3 Repeater with Fan Hood Installation
- 3.4 Five-Band System Installation
- 3.5 Grounding
- 3.6 Ensure Good EMV Protection
- 3.7 Fiber Optic Connection
- 3.8 External Alarm and Relay Connections
- 3.9 Power and Backup Battery
- 3.10 Power ON
- 3.11 Closing and Securing the Repeater
- 4 Opening a Session and Navigating GUI
- 5 MBF-40 Commissioning
- 6 MBF-40 Full GUI Description
- 7 Monitoring and Fault Sourcing
- 8 Maintenance
- Appendix A - US Specifications
- Appendix B - Canada Specifications
- Appendix C – F/O Cleaning Procedure
AXELL MBF-40 AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd Doc. No. 00071UM Rev. 3.4 35
3.5 Grounding
Connect the grounding protection as follows:
• Ensure that good grounding protection measures are taken to create a reliable
repeater site.
• Make sure to use adequately dimensioned grounding cables. The minimum
recommended conductive area for a grounding cable is 16mm
2
• Make sure the grounding product used is suitable for the kind and size of cable being
used.
• Connect the repeater box bolt to the same ground.
NOTE: For Dual Unit assemblies (five frequency band support), ground both units.
Figure 3-22: Grounding the MBF-40