User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 Repeater Installation
- 3.1 Location Criteria
- 3.2 Standard Repeater Installation
- 3.3 Repeater with Fan Hood Installation
- 3.4 Five-Band System Installation
- 3.5 Grounding
- 3.6 Ensure Good EMV Protection
- 3.7 Fiber Optic Connection
- 3.8 External Alarm and Relay Connections
- 3.9 Power and Backup Battery
- 3.10 Power ON
- 3.11 Closing and Securing the Repeater
- 4 Opening a Session and Navigating GUI
- 5 MBF-40 Commissioning
- 6 MBF-40 Full GUI Description
- 7 Monitoring and Fault Sourcing
- 8 Maintenance
- Appendix A - US Specifications
- Appendix B - Canada Specifications
- Appendix C – F/O Cleaning Procedure
AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
28 Doc. No. 00071UM Rev. 3.4 © Axell Wireless Ltd
The brackets and Rear Fan Assembly is shown below.
Figure 3-16: Assembled Rear Fan Hood and Mounting Brackets
4. Referring to the MBF-40 User’s Manual, prepare the mounting area and hang the
repeater on the wall:
• Drill the holes in the wall.
• Mount the Repeater.
Figure 3-17: Mount the Repeater
Prepare mounting area
and mount repeater