User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 Repeater Installation
- 3.1 Location Criteria
- 3.2 Standard Repeater Installation
- 3.3 Repeater with Fan Hood Installation
- 3.4 Five-Band System Installation
- 3.5 Grounding
- 3.6 Ensure Good EMV Protection
- 3.7 Fiber Optic Connection
- 3.8 External Alarm and Relay Connections
- 3.9 Power and Backup Battery
- 3.10 Power ON
- 3.11 Closing and Securing the Repeater
- 4 Opening a Session and Navigating GUI
- 5 MBF-40 Commissioning
- 6 MBF-40 Full GUI Description
- 7 Monitoring and Fault Sourcing
- 8 Maintenance
- Appendix A - US Specifications
- Appendix B - Canada Specifications
- Appendix C – F/O Cleaning Procedure
AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
22 Doc. No. 00071UM Rev. 3.4 © Axell Wireless Ltd
3.2.5 Mount the Repeater
CAUTION!!! It is recommended that two people lift the repeater since (depending
upon the configuration) the MBF-40 weighs between 20 and 38 kg (44 and 84 llb)
To mount the repeater
• Align repeater with the four fixings. Great care should be exercised here as the
repeater is very heavy. (A suitably rated heavy duty scissor lift table/trolley may be
suitable for this operation.)
• Once repeater is held in the chosen position, carefully insert the fixing bolts through
the mounting lugs of the Repeater and into the sleeve/anchor sections of the fixing
in the wall and tighten the bolts.
• The repeater needs to be mounted tightly to eliminate vibration.
Figure 3-11: Mount Repeater
Align Repeater and
Secure Bolts