User's Manual

AXELL MBF-40 AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd Doc. No. 00071UM Rev. 3.4 19
Figure 3-5: Mounting Plates Fixed to MBF
3.2.4 Wall Marking and Drilling
• The Repeater wall mount brackets assembly should be fixed to a solid wall (these
include brickwork, blockwork, and concrete.);
WARNING!! Due to the weight of the Repeater, it is NOT recommended to fix to a
hollow wall).
• To provide secure fixing to a solid wall, the most common method is drilling and
plugging. The size of fixing is dependent on the item to be fixed and the nature of
the wall, The Repeater should be fixed with mild steel, M6 (50mm to 75mm)
rawlbolts or similar.
• Care must be taken to ensure the alignment of the four fixings. A spirit level or
plumb line should be used to ensure horizontal/vertical alignment.
Figure 3-6: M6 Rawlbolt – recommended for wallmount.