User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 Repeater Installation
- 3.1 Location Criteria
- 3.2 Standard Repeater Installation
- 3.3 Repeater with Fan Hood Installation
- 3.4 Five-Band System Installation
- 3.5 Grounding
- 3.6 Ensure Good EMV Protection
- 3.7 Fiber Optic Connection
- 3.8 External Alarm and Relay Connections
- 3.9 Power and Backup Battery
- 3.10 Power ON
- 3.11 Closing and Securing the Repeater
- 4 Opening a Session and Navigating GUI
- 5 MBF-40 Commissioning
- 6 MBF-40 Full GUI Description
- 7 Monitoring and Fault Sourcing
- 8 Maintenance
- Appendix A - US Specifications
- Appendix B - Canada Specifications
- Appendix C – F/O Cleaning Procedure
AXELL MBF-40 AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd Doc. No. 00071UM Rev. 3.4 9
1.7.3.2 Dual-Band Dual-Antenna Model
Figure 1-10: Dual band Dual Service Antenna Model
F/O Converter LEDs and
optic connector to which
routed optic fiber is
connected (section 3.7)
Power connections
(section 3.9)
Controller module with
USB local setup
connections (section 7.4.1
for LED descriptions)
Rechargeable battery
pack (section 3.9.6)
Power and battery
switches (section 3.9)
Alarms and relay
connections (section 3.8)