User Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 Repeater Installation
- 3.1 Location Criteria
- 3.2 Standard Repeater Installation
- 3.3 Repeater with Fan Hood Installation
- 3.4 Five-Band System Installation
- 3.5 Grounding
- 3.6 Ensure Good EMV Protection
- 3.7 Fiber Optic Connection
- 3.8 External Alarm and Relay Connections
- 3.9 Power and Backup Battery
- 3.10 Power ON
- 3.11 Closing and Securing the Repeater
- 4 Opening a Session and Navigating GUI
- 5 MBF-40 Commissioning
- 6 MBF-40 Full GUI Description
- 7 Monitoring, Fault Sourcing and Maintenance
- Appendix A - US Specifications
- Appendix B - Canada Specifications
- Appendix C – F/O Cleaning Procedure
AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
72 Doc. No. 00071UM Rev. 3.2 © Axell Wireless Ltd
7.2 Monitoring Via the MBF-40 Home Screen
In addition to RF settings and readings, the MBF-40 Home screen provides detailed
information on the operation status of internal modules. This information can be used to
aid in remotely troubleshooting the Remote.
To access the MBF-40 Main Monitoring and Configuration window
1. Access the OMU II main windows, click the Nodes button, choose the remote related
node and click the adjacent Control button. The MBF-40 Home window appears in
Basic View. To view more details, click Advanced.
Figure 7-1: MBF-40 Main Screen Advanced
General
(Same as Basic
view)
Detailed Repeater
Status view
Detailed fiber optic
status
Power measurements
status