User Manual

AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
64 Doc. No. 00071UM Rev. 3.2 © Axell Wireless Ltd
3. For each alarm:
• Set the Trigger as High or Low as required.
• Assign the alarm a recognizable description
4. Click Apply.
Figure 6-4: Configure External Alarms
6.1.4 IP Address
This procedure describes how to set up the IP address either manually or
configure for acquisition via DHCP (usually configured for local management options).
To configure the IP address
1. In the Main menu, click the Config button.
2. Click on Ethernet.
3. For manual IP address configuration:
• Select Manually Configure IP Address.
• Set the IP, Subnet Mask, Default Gateway and DNS addresses.
• Click Apply.
4. For DHCP IP address configuration:
• Select Automatically Obtain IP Address (DHCP).
• No other settings are required.
• Click Apply.
The Manual configuration settings are illustrated below.
Figure 6-5: Configure Local Network Parameters
Enter Alarm
Description
Set High/Low