User Manual

AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
62 Doc. No. 00071UM Rev. 3.2 © Axell Wireless Ltd
6 MBF-40 Full GUI Description
This chapter provides a detailed description of the complete MBF-40 specific Web GUI
accessible when opening a direct session to the MBF-40.
When an indirect session (via OMU II) is opened to the MBF-40, only the MBF-40 Main
window is available. Additional options are available when a direct session is opened to
the MBF-40 (not via OMU II).
This chapter describes how to open local and remote indirect sessions to the Remote
and the available options when such a session is opened.
6.1 Configuring General Parameters
6.1.1 Site Information – MBF-40 Identification
It is recommended to assign each MBF-40 a recognizable name that will identify
the location, site name, etc. The Site Information button provides access to MBF-40
hardware and software version information.
To set MBF-40 TAG
1. In the Home window, click the edit button next to Tag.
Figure 6-1. Set MBF-40 TAG Name
2. Enter the Name (up to 30 characters), click OK and click Apply.
To view MBF-40 Site Information
Click the Config button and click on the Site Information icon. Two areas are
displayed:
• Control Module – provides hardware and software version information.
• Site Information – provides MBF-40 identification information.
NOTE: for 5-band MBF-40 Site Information, see Figure 4-6.
Edit Tag
Lock Name