User Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 Repeater Installation
- 3.1 Location Criteria
- 3.2 Standard Repeater Installation
- 3.3 Repeater with Fan Hood Installation
- 3.4 Five-Band System Installation
- 3.5 Grounding
- 3.6 Ensure Good EMV Protection
- 3.7 Fiber Optic Connection
- 3.8 External Alarm and Relay Connections
- 3.9 Power and Backup Battery
- 3.10 Power ON
- 3.11 Closing and Securing the Repeater
- 4 Opening a Session and Navigating GUI
- 5 MBF-40 Commissioning
- 6 MBF-40 Full GUI Description
- 7 Monitoring, Fault Sourcing and Maintenance
- Appendix A - US Specifications
- Appendix B - Canada Specifications
- Appendix C – F/O Cleaning Procedure
AXELL MBF-40 AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd Doc. No. 00071UM Rev. 3.2 53
4.3.3 Configuration Screen Overview
The configuration screen provides access to the MBF-40 configuration options.
To access the configuration screen
Click on the Config menu option in the Main window. The following screen appears.
Option Description
Site
Information
Configure and display MBF-
40 identification information. See section
6.1.1
External
Alarms
Used to activate and assign names to external alarms. See section
6.1.3
Change
password
Used to update system login password for the logged-in user. See
section
6.4.3
Date and Time
Used to configure the time stamp for dating MBF-40 events. See
section
6.1.2.
Ethernet
Used to define the IP Address for remote access via Ethernet. See
section 6.1.4
Remote
Communication
Used to configure remote communication parameters and AEM
integration. See section
6.2
Axell Shell
Command line used to communicate with the remote units. List of
commands is found under Help. See section
6.6
Attribute
Reference
CLI commands and attributes directory. See section 6.7
Reboot
controller
Soft restarts the MBF-40 device. See section 6.5.
SNMP Agent
SNMP Agent configuration. See section
6.3