User Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 Repeater Installation
- 3.1 Location Criteria
- 3.2 Standard Repeater Installation
- 3.3 Repeater with Fan Hood Installation
- 3.4 Five-Band System Installation
- 3.5 Grounding
- 3.6 Ensure Good EMV Protection
- 3.7 Fiber Optic Connection
- 3.8 External Alarm and Relay Connections
- 3.9 Power and Backup Battery
- 3.10 Power ON
- 3.11 Closing and Securing the Repeater
- 4 Opening a Session and Navigating GUI
- 5 MBF-40 Commissioning
- 6 MBF-40 Full GUI Description
- 7 Monitoring, Fault Sourcing and Maintenance
- Appendix A - US Specifications
- Appendix B - Canada Specifications
- Appendix C – F/O Cleaning Procedure
AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
48 Doc. No. 00071UM Rev. 3.2 © Axell Wireless Ltd
1. Open the web browser and type "axell-ne" in the address bar.
The Axell login dialog appears.
Figure 4-2: Login Screen
2. Use the following username and password to login:
• Username: axell
• Password: AxellPasswd
Note: It is highly recommended to change the default password according to section
6.4.3.
The Web GUI Main Window appears. This is the same window is also viewed via the
OMU II.
4.1.2 Remote Connection and Login
This type of Web session requires connecting the Repeater to the network.