User Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 Repeater Installation
- 3.1 Location Criteria
- 3.2 Standard Repeater Installation
- 3.3 Repeater with Fan Hood Installation
- 3.4 Five-Band System Installation
- 3.5 Grounding
- 3.6 Ensure Good EMV Protection
- 3.7 Fiber Optic Connection
- 3.8 External Alarm and Relay Connections
- 3.9 Power and Backup Battery
- 3.10 Power ON
- 3.11 Closing and Securing the Repeater
- 4 Opening a Session and Navigating GUI
- 5 MBF-40 Commissioning
- 6 MBF-40 Full GUI Description
- 7 Monitoring, Fault Sourcing and Maintenance
- Appendix A - US Specifications
- Appendix B - Canada Specifications
- Appendix C – F/O Cleaning Procedure
AXELL MBF-40 AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd Doc. No. 00071UM Rev. 3.2 17
3.2 Standard Repeater Installation
NOTE: Refer to this section if your repeater installation does not consist of either a fan assembly or a
Master / Slave (five service) system.
3.2.1 Unpacking
Upon receiving the MBF-40 Repeater perform the following:
1. Examine the shipping container for damage before unpacking the unit.
2. Perform a visual inspection to reveal any physical damage to the equipment.
3. Verify that all of the equipment (listed below) is included. Otherwise contact Axell
Wireless Ltd. The MBF-40 Repeater is shipped with the following equipment:
3.2.2 Parts List
Package Contents
MBF-40
Single/Dual/Tri/Quad-
band Repeater
CD containing User’s
Manual and USB driver
Mounting Brackets
Cable protection KPL
Additional (supplied)
installation components:
Qty.
Description
4x
M8x12 bolts for securing the
Repeater to the
brackets
1x Insex tool for bolts
1x
Fiber Conduit inlet hose fitter (may be pre-
assembled)
1 x Key
Optional equipment
AC Cable [30 ft.] – Long cable for AC power
Alarm Cable [30 ft.] –
Long cable for External Alarms
Input