User Manual
Table Of Contents
- 1 Introduction
- 2 Installation Requirements
- 3 MBF-20 Installation
- 4 MBF-20 Setup and Commissioning
- Appendix A: US/Canada Specifications
- Appendix B: Optic Fibre Cables Connections
- Appendix C: F/O Cleaning Procedure
- Appendix D: LED Troubleshooting
MBF-20 AMERICAS REMOTE
PRODUCT DESCRIPTION AND USER’S MANUAL
2 User Manual Doc No. 00068UM Rev. 2.4 © Axell Wireless Ltd
1.1 Features and Capabilities
• Comprehensive in-building coverage in a simple and cost effective manner
• Up to 4 frequency bands in two compact enclosures supported on one fiber strand,
full multi-operator support
• Band support (model dependent):
• Band support (model dependent):
• 850 MHz and 1900 MHz
• 700 MHz and 1700MHz
• Two service antenna ports, 23dBm composite per antenna port per band (model
dependent)
• Maximum uplink and downlink RF Gain: 18 dB
• Single fibre feed for a quad-band unit
• Flexible architecture allows MIMO support
• Plug-and-play:
• More service support without adding F/O cables
• Connected unit is automatically detected, commissioned and managed
from the OMU II via a Web GUI sessions
• Very low noise factor (10 dB) minimizing interference to BTS and increasing high
speed data throughput
• LEDs for local alarm indicators