User's Manual
Table Of Contents
- 1 INTRODUCTION
- 2 BOOSTER PRE-INSTALLATION REQUIREMENTS AND GUIDELINES
- 3 BOOSTER MOUNTING AND INSTALLATION
- 3.1 Booster Installation Overview
- 3.2 Unpacking and Package Contents
- 3.3 Mounting the System
- 3.4 Connections
- 4 SETUP AND COMMISSIONING
- 5 ADMINISTRATIVE OPERATIONS
- 6 MONITORING AND TROUBLESHOOTING
SMR 700 800 HIGH POWER PS NFPA CLASS B SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage
Date: 23-Nov-16
www.cobham.com/wireless
Doc. No.00060CDUM Rev. 3.4 Page | 62
6.5 Modifying Alarm Severities
The Alarms Configuration tab is used to modify the factory set level (minor, major or critical) of specific
alarms when they are activated.
To modify the Alarm Severities
• From the left pane, select 700/800 item and choose the Alarms Configuration tab.
• When activated due to a fault, the alarm is displayed in the selected color. The color corresponds to the
alarm level.
• Each alarm can be set to one of the following levels: Minor (yellow), Major (orange) or Critical (red).
Figure 6-7. Modifying Alarm Severities