User's Manual

SMR 700 800 HIGH POWER PS NFPA CLASS B SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage
Date: 23-Nov-16
www.cobham.com/wireless
Doc. No.00060CDUM Rev. 3.4 Page | 31
4.2.2.3 700/800 Band Menu Tabs
This section describes the tabs available when 700-800 is selected in the left pane.
Item Band Specific Description
Alarms
Common alarms pane for both bands. See section
6.3.1.
Alarms Configuration
Viewing and modifying default alarm levels (critical, major,
minor), major). See section 6.5.
Control & Params
RF configuration options for each band. See section
4.3.
Band Info
Access this tab to do the following (see section
5.2.2):
• View band specific information, including supported filter
width, SW build, and more.
• For dual-band units, configure maximum number of filters
available for each band (for a total of 24).
Backup and Restore
Used to backup and manage the configuration files. See section
5.3.
SW Upgrade
Embedded SW upgrade option. Section
5.4.2.
4.2.2.4 CMU Pane and Tabs
This section describes the tabs available when the CMU item is selected in the left pane.
Item Description / Values
CMU Alarms
Shows currently active alarms (see
6.3.2).
CMU Info
Access this tab to do the following (see section
5.2.2):
• Configure repeater operation mode (Class A/B).
• View Booster level information such as SW and HW versions
and identification number.
• Set minimum level of displayed alarms (see
5.2.1).
Communication Configuration
Used to set IP Address and SNMP parameters (see
4.6)
Alarms Log
Displays booster level log of past and current alarms (see
6.3.3).
External Alarms
Provides external alarm configuration options: High/Low, name,
etc. (see
4.5)
CMU SW Upgrade
Used to perform CMU software upgrade (see
5.4.1)
Modem Direct Access N/A