User's Manual
Table Of Contents
- 1 INTRODUCTION
- 2 BOOSTER PRE-INSTALLATION REQUIREMENTS AND GUIDELINES
- 3 BOOSTER MOUNTING AND INSTALLATION
- 3.1 Booster Installation Overview
- 3.2 Unpacking and Package Contents
- 3.3 Mounting the System
- 3.4 Connections
- 4 SETUP AND COMMISSIONING
- 5 ADMINISTRATIVE OPERATIONS
- 6 MONITORING AND TROUBLESHOOTING
SMR 700 800 HIGH POWER PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage
Date: 22-Dec-16
www.cobham.com/wireless
Doc. No.00068CDUM Rev. 2.3 Page | 44
5.2 General Parameters
Two panes provide general information and configuration options:
• CMU Info tab – booster level parameters
• Band Info tab – band level parameters with a dedicated tab per band
5.2.1 Booster Level General Parameters
Use the CMU Info screen to do the following:
• View the hardware and software versions of the booster
• Set log level and alarm thresholds
To access the CMU Information window
1. In the left pane, select CMU and click the CMU Info tab.
2. You may define the following parameters:
• Log Level - sets the minimum fault level that is logged.
• CMU name – identifiable user-defined name.
• Auto Ack – when enabled, alarms are deactivated automatically when the corresponding
fault no longer exists
(Other fields provide version and identification information.)
Figure 5-3. CMU Level Info
Auto ACK
Identification
information
Log level