User's Manual
Table Of Contents
- 1 INTRODUCTION
- 2 BOOSTER PRE-INSTALLATION REQUIREMENTS AND GUIDELINES
- 3 BOOSTER MOUNTING AND INSTALLATION
- 3.1 Booster Installation Overview
- 3.2 Unpacking and Package Contents
- 3.3 Mounting the System
- 3.4 Connections
- 4 SETUP AND COMMISSIONING
- 5 ADMINISTRATIVE OPERATIONS
- 6 MONITORING AND TROUBLESHOOTING
SMR 700 800 HIGH POWER PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage
Date: 22-Dec-16
www.cobham.com/wireless
Doc. No.00068CDUM Rev. 2.3 Page | 29
The Booster login dialog appears.
• Enter the authentication information:
Default User Name : admin
Default Password : admin.
NOTE: Both are case sensitive and must be
entered with lower case letters.
• Click Login. The application main
window appears.
NOTE: Quickly review the following section
describing the application window and then
proceed to configure the signal levels according
to section
4.3.
Figure
4-5. Login
4.2.2 Navigating the Web GUI Application
This section describes how to navigate the Web Management application. The GUI interface provides the
following items:
• Operation options – always available in the header
• Menu selection left pane – provides three types of menu options
• Menu Tabs – sets of tabs corresponding to the selected left pane menu options
• Work area – corresponds to selected tab
Figure 4-6. Main Window
Menu selection
Display for
selected tab
Tabs related to
selected menu item
Operation Buttons