User's Manual

Table Of Contents
SMR 700 800 HIGH POWER PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless Coverage
Date: 22-Dec-16
www.cobham.com/wireless
Doc. No.00068CDUM Rev. 2.3 Page | 55
6.3 WEB GUI Alarms Screens
Three WEB GUI alarms screens are provided:
Band level (700/800) Alarms screen
CMU level Alarms screen
Alarms log
6.3.1 700-800 Alarms Screen
The Alarms tab displays any alarms generated by the band(s).
To view the alarms
From the left pane, select the 700-800 item and choose the Alarms tab. The relevant alarms are
displayed.
Figure 6-4. Band Level Alarms Status Tab
Note the following:
When at fault, each generated alarm is displayed according to the factory set severity value for that
alarm, as Minor (yellow), Major (orange) or Critical (red). The alarm settings can be modified via the
Alarms Configuration tab. Section
6.5.
The Ack All button is available only if the alarms are not configured to be automatically cleared by the
system when the corresponding fault exists. The automatic acknowledgment can be modified via the
CMU Info tab (see section
5.2.1).
If Ack All is available, click it to reset ALL displayed alarms.
The alarms are described on the following page
Acknowledge ALL alarms
(available if system is
not
configured for auto-
acknowledge)