User's Manual

Table Of Contents
SMR 700 800 HIGH POWER PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless Coverage
Date: 22-Dec-16
www.cobham.com/wireless
Doc. No.00068CDUM Rev. 2.3 Page | 27
4 SETUP AND COMMISSIONING
This section describes the setup procedures for the Booster.
NOTE: D-MBR 700/800 screens are used to illustrate the procedures in this chapter. Where relevant,
differences in screen displays or parameter values for various models covered in this manual will be
addressed.
4.1 Overview of the Commissioning Procedure
The Booster is designed for simple plug-and-play operation, only requiring the setup of a number of
parameters via a local Web connection and verifying that the system is operating properly.
Figure 4-1 Commissioning Overview
Step-1
Open a local session
Step-2
RF Parameters
Step-3
Date and Time
Step-4
External Alarms Config
Step-5
IP Address
Step-6
Password Change