User's Manual

Axell D-SBR 3709S Repeater
PRODUCT DESCRIPTION AND USER’S MANUAL
36 Doc PN 00038UMCD Rev. 1.6 © Axell Wireless Ltd
To access Backup/Restore tab
1. From the Tree Pane, select the Band item (i.e. 900).
2. Select the Backup/Restore tab. The following tab appears.
Note: The following figure is only an example of the Backup/Restore tab.
The following table provides a description of the available options (buttons) in the
Backup /Restore tab shown above.
Button Description
Backup
Used to backup the current repeater configuration. See section 5.4.1.
Remark
Used to assign the repeater configuration file (to be backed up) a
recognizable name. See section 5.4.1.
Restore
Used to restore previous repeater configuration. See section 5.4.2.
Delete Select file from list and click Delete to remove.
Refresh
Click Refresh to list of available configuration files
Upload
Used to upload new configuration file to repeater. See section 5.4.3.
5.4.1 Backup of Repeater Configuration
To perform backup procedure
1. To assign the configuration file a recognizable name, enter a name in the remark
field.
Note: This must be performed before performing the backup operation; otherwise the file will
automatically be assigned a name according to the backup date and unit ID. The name cannot
be modified once the backup has been performed.
2. Click the Backup button located on the right-hand side of the tab.
3. The file will be added to the table displayed in the Backup/Restore tab.