User's Manual

Axell D-SBR 3709S Repeater
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd Doc PN 00038UMCD Rev. 1.6 29
4.5.2 IP Address Setup and Repeater Name
The Repeater supports both Static and DHCP addresses. A unique technology enables
applying both types to the same Ethernet port. Both addresses may enable local and
remote management.
• Local IP Address – Static IP assigned by the user to the system. The default Static IP
address is 192.168.1.253. It is highly recommended to preserve this setup. In case
of a change, make sure you record the newly assign IP.
• DHCP Address – address assigned by DHCP server – used for remote management
via an Ethernet connection.
To assign the unit a name and IP address
1. Access the Communication tab according to section 4.5.1.
2. To assign the unit addresses:
• Local address - in the IP Configuration area, assign the unit the Local IP
address, Netmask and Gateway parameters provided by your system
administrator.
• DHCP server address – checkmark the option Request Additional DHCP
Address. The assigned address can be seen in the DHCP Address field.