User's Manual

AXELL DIGIMINI- AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd DIGImini Americas User Manual Rev 3.5 61
To assign the unit IP address
1. Click the CMU tree item and then click the Communication Configuration tab.
2. To assign the unit addresses:
• Local IP address - in the IP Configuration area, assign the unit the IP address,
Netmask and Gateway parameters provided by your system administrator.
• DHCP server address – checkmark the option Request Additional DHCP Address.
The assigned address can be seen in the DHCP Address field.
6.7.3 General Modem Parameters
This section describes the available modem parameters. Specific procedures for GSM/GPRS modem,
CDMA modem or for Direct CS are described in the relevant sections.
To define the modem parameters
1. Click CMU in the left tree pane and select the Communication Configuration pane.
2. In the Modem area, select the Communication mode and define any additional parameters
according to the table below. (Any defined fields in the figure below are only an example!)