User's Manual

AXELL DIGIMINI- AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
56 DIGImini Americas User Manual Rev 3.5 © Axell Wireless Ltd
6.5.2 Navigating the Web GUI Application
When a session is opened via the DMCU, all the available management capabilities are displayed.
The Web Access interface provides three groups of options, listed in the left side Topology Tree
items:
• CMU – system control level options. These include communication parameters, alarms log,
external alarms configuration options and more.
• Band (e.g. 850-1900) – band specific RF parameters control and monitoring options. The
displayed bands depend on the supported configuration: Single, Dual, Triple or Quad band
configuration.
• Users – Provides user administration options and enables changing user passwords.
Figure 6-7. Example of Web GUI Screen (shows dual-band)
6.5.2.1 Band Tabs
The band pane and tabs are accessed by clicking on the band item (e.g. 850-1900) in the topology
tree. The upper area of each selected pane shows the tabs corresponding to that pane.
Item
Description / Values
Alarms
Displays various alarms generated by the Repeater and enables
monitoring (see detailed description in section 5.3.1).
Control and Params
Used for adjusting RF parameters and channel configuration
(signal level, gain and bandwidth). See detailed description in
section
5.2.6).
Band Info
Shows information on the selected band, including valid
definable bandwidth pre sub-band. See section 5.2.5.
Backup/Restore
Configuration files management options (configuration files
can be stored on the Repeater for access). See section 6.8.3.
Topology
Tree Items
Pane related to
selected tree
item
Tabs related to
selected Tree
item
Operation buttons