User's Manual

AXELL DIGIMINI- AMERICAS REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

6.5.1 Login to the Repeater

NOTE: The Repeater is factory assigned the address 192.168.1.253. Initial login is performed using

this address; however it is recommended to make the necessary modifications according to

information provided by your network administrator.

To login to the Repeater

1. Open one of the Flash-enabled browsers listed in the system requirements.

2. In the address line, enter the IP address of the Repeater.

http://192.168.1.253. A session will be

established with the Repeater an the login dialog appears.

3. Type the default User Name admin and the default Password admin.

Note that both are case sensitive and must be entered with lower case letters.

4. Click Login. The application main window appears.

5. Quickly review the following section describing the application window and then proceed to

configure the signal levels according to section

5.2.3.