User's Manual

AXELL DIGIMINI- AMERICAS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
58 Doc PN 4000003431 Rev. 3.8 © Axell Wireless Ltd
6.4.4 Connecting the DMCU to the Repeater
To install the DMCU
1. Secure the DMCU to the wall – near the Repeater.
2. Connect the DMCU power converter to an AC power source and to the DMCU.
3. Connect the supplied RS485 to RS485 cable between the CTRL connector of the DMCU and
Repeater (side panel).
4. Connect the supplied cable between the Modem connector of the DMCU and Repeater (side
panel).
5. Optional - connect the external alarms according to the instructions in the following section.
Figure
6-4. DMCU Connections
Modem to Modem
CTRL to CTRL