User's Manual

AXELL DIGIMINI- AMERICAS REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

5.2.5 Bandwidth and the Number of Available Bands

Each repeater supports either one or two bands (single or dual-band). Up to Six sub-bands may be

defined per two bands per repeater (e.g. on a dual-band repeater supporting bands 850MHz and

1900MHz, 4 sub-bands may be set for the 850MHz band and 2 sub-bands for the 1900MHz band,

with a total sum of 6 sub-bands). The number of available sub-bands or channels depends on the

technology and selected bandwidth as detailed below (note that some bandwidths (e.g. 15 or 20MHz

at 700/1900 MHz GSM) take up two channel resources).

The information can be viewed via the Band Info tab (described on the following page).

Frequency Band Technology Filter BW Number of Sub-

band Resources

850/1700/1900MHz CDMA 2.5MHz – 10MHz

(in 2.5MHz steps)

850/1700/1900MHz CDMA 12.5MHz – 25MHz

( 2.5MHz steps)

850MHz CDMA 1.5, 2.5MHz 1

850MHz CDMA 11MHz 2

700U/700L/1700/850/1900MHz LTE 1.4, 3, 5, 10MHz 1

700L/850/1700/1900MHz LTE 15MHz 2

850/1700/1900MHz LTE 20MHz 2

850/1700/1900 GSM 200KHz-11,000KHz

( in 200KHz steps)

850/1700/1900 GSM 11200KHz-25MHz

( in 200KHz steps)

850/1700/1900MHz WCDMA 5, 10 MHz 1

850/1700/1900MHz WCDMA 15,20, 25 MHz 2