User's Manual

AXELL DIGIMINI- AMERICAS REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

2.2.3 Mobile (Service) Antenna Installation Criteria

Determine the antenna installation configuration, according to the transmission requirements and the

installation site conditions.

Installation requirements:

• An indoor antenna should be installed at a convenient location. It should be free of metallic

obstruction.

• Install the Service Antenna at the designated height and tune it roughly toward the Service

coverage area.

• Installation of this antenna must provide a minimum separation distance of 20cm from any

personnel within the area.

2.3 Repeater Pre-Installation Requirements

2.3.1 Safety Guidelines

Before installing the Repeater, review the following safety information:

• Follow all local safety regulations when installing the Repeater.

• Only qualified personnel are authorized to install and maintain the Repeater.

• Ground the Repeater with the grounding bolt located on the external lower side of the Repeater).

• Do not use the grounding bolt to connect external devices.

• Follow Electro-Static Discharge (ESD) precautions.

• Use low loss cables to connect the antennas to the Repeater.

2.3.2 Required BTS Information

Required BTS Information

• BTS channels

• BTS output power per channel

• BTS antenna gain

• BTS antenna height

• Distance from Repeater site to BTS