User's Manual

D-MBR 3707-3708 PS NFPA CLASS B SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless Cobham Wireless – Coverage
Date: 6-Set-15
Page | 56 Doc. No. 00060CDUM Rev. 1.0
6.3.2 Backup Band Configuration
To backup the current configuration
1. In the left pane, click the 700-800 item and then click the Backup/Restore tab.
2. To assign the configuration file a recognizable name, enter a name in the remark field.
Otherwise, the file will be assigned a name by the system.
3. Click the Backup button located on the right-hand side of the tab.
4. The file will be added to the table displayed in the Backup/Restore tab.
Note: The file name (under File) is a link that enables uploading the file to another location.
Figure 6-7. Backup Booster Info
6.3.3 Restoring Band Configuration
To restore previous configuration
1. In the left pane, click the 700-800 item and then click the Backup/Restore tab.
2. Select the required configuration file (enable corresponding radio button) from the available list
in the Backup/Restore tab.
3. Click the Restore button.
Figure 6-8. Restore Band Configuration
4. Click on the Control and Params tab and verify that the required configuration settings have
been restored.
1. Select
configuration file
(radio button)
2. Click Restore.
1. Assign tag
2. Click Backup
Currently saved files
(click link to Save As)