User's Manual

AXELL D-MBR 3007-3008-
PS NFPA REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
42
5.3.2
Backup of Repeater Configuration
NOTE
: The backed file will automatically be assigned a name according to the backup date and unit
ID. The name cannot be modified
while the backup file is saved onto the Repeater. However, before
the backup procedure begins, the user may assign the file a recognizable name via the Remark field.
To perform backup procedure
1. To assign the configuration
file a recognizable name, enter a name in the
field. Otherwise, the file will be assigned a name by the system.
2. Click the Backup
button located on the right
3.
The file will be added to the table dis
Note: The file name (under File) is a link that enables uploading the file to another location.
Figure
5.3.3
Restoring Previous Repeater Configuration
To restore previous configuration
1.
Select the required configuration file (enable corresponding radio button) from the
available list in the Backup/Restore tab.
2. Click the Restore button.
Figure
3. Click on the
Control and Params
settings have been restored.
Selected
configuration
file
PS NFPA REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
UMCD00013 Rev 2.2 ©
Axell Wireless Ltd
Backup of Repeater Configuration
: The backed file will automatically be assigned a name according to the backup date and unit
while the backup file is saved onto the Repeater. However, before
the backup procedure begins, the user may assign the file a recognizable name via the Remark field.
file a recognizable name, enter a name in the
field. Otherwise, the file will be assigned a name by the system.
button located on the right
-hand side of the tab.
The file will be added to the table dis
played in the Backup/Restore tab.
Note: The file name (under File) is a link that enables uploading the file to another location.
Figure
5-7. Backup Repeater Info
Restoring Previous Repeater Configuration
To restore previous configuration
Select the required configuration file (enable corresponding radio button) from the
available list in the Backup/Restore tab.
Figure
5-8. Restore Repeater Info
Control and Params
tab and verify that the required configuration
settings have been restored.
Axell Wireless Ltd
: The backed file will automatically be assigned a name according to the backup date and unit
while the backup file is saved onto the Repeater. However, before
the backup procedure begins, the user may assign the file a recognizable name via the Remark field.
file a recognizable name, enter a name in the
remark
played in the Backup/Restore tab.
Note: The file name (under File) is a link that enables uploading the file to another location.
Select the required configuration file (enable corresponding radio button) from the
tab and verify that the required configuration
Restore
button