User's Manual

© Axell Wireless Ltd
4.4
Configuring the External Alarms
Any connected external
alarms (sectio
to the instructions provided in this section.
To configure external alarms
1. Click on CMU
in the tree pane and select
dialog appears.
Figure
2.
For each connected alarm:
• Checkmark the
Active
• Verify the alarm
Normal Mode
• Set the alarm
Severity
• In the
Description
open).
NOTE: Triggered external alarms are displayed in the
Click CMU
Axell D-
MBR 3007
PRODUC
T DESCRIPTION AND USER’S MANUAL
UMCD00013 Rev 2.2
Configuring the External Alarms
alarms (sectio
n 3.9
) must be enabled and configured according
to the instructions provided in this section.
To configure external alarms
in the tree pane and select
the
External Alarms
Figure
4-6. External Alarm Configuration Dialog
For each connected alarm:
Active
checkbox.
Normal Mode
is set to Low.
Severity
as Critical, Major or Minor
Description
field, assign the alarm an identifiable name
NOTE: Triggered external alarms are displayed in the
Axell-CMU-Alarms
tab.
External
Alarms
MBR 3007
-3008-PS-NFPA
T DESCRIPTION AND USER’S MANUAL
35
) must be enabled and configured according
External Alarms
tab. The following
field, assign the alarm an identifiable name
(e.g. Door
tab.
External
Alarms
tab