User's Manual

© Axell Wireless Ltd
3.3
Unpacking
Upon receiving the D-
MBR
•
Examine the shipping container for damage before unpacking the unit.
•
Perform a visual inspection to reveal any physical damage to the equip
•
Verify that all of the equipment (listed below) is included (see also the following
page). Otherwise contact Axell Wireless.
D-MBR PS-NFPA
Ethernet cable
CD with documentations
Mounting Bracket with AC to DC
power converter.
US power
plug cables (to AC outlet)
Additional (supplied) installation
components:
No. Description
1
Flange nut, 5/16
2 Wedge anchor,
∅
65 mm
3
Hex washer head screw,
∅ 8 mm
4
Washer, spring,
5 Washer, flat, ∅
8 mm
6 Clamp
7 Washer, flat, ∅
8
Screwdriver, Allen
Axell D-
MBR 3007
PRODUC
T DESCRIPTION AND USER’S MANUAL
UMCD00013 Rev 2.2
Unpacking
MBR
unit, perform the following:
Examine the shipping container for damage before unpacking the unit.
Perform a visual inspection to reveal any physical damage to the equip
Verify that all of the equipment (listed below) is included (see also the following
page). Otherwise contact Axell Wireless.
CD with documentations
Mounting Bracket with AC to DC
plug cables (to AC outlet)
Additional (supplied) installation
components:
No
.
Flange nut, 5/16
4
∅
12 x 4
Hex washer head screw,
4
Washer, spring,
∅ 8 mm 4
8 mm
2
2
28 mm 4
Screwdriver, Allen
1
Figure 3-1
. Installation Components
MBR 3007
-3008-PS-NFPA
T DESCRIPTION AND USER’S MANUAL
15
Examine the shipping container for damage before unpacking the unit.
Perform a visual inspection to reveal any physical damage to the equip
ment.
Verify that all of the equipment (listed below) is included (see also the following
. Installation Components