User's Manual

AXELL D-MBR 3007-3008-
PS NFPA REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
6
1.6.2
Operation Buttons
The following Operation buttons are available.
Item
Description / Values
Send
Click to save changes
changes will not be saved.
Refresh
Click to refresh the current screen and update the displayed
data
CMU Reset
Click to reset the Web Access application. Use in case of failure
or display problems
Date and Time
Used to set the Repeater clock.
Admin: Admin
Shows the current access level.
Help
Click Help to display an e
This Help is general by its nature and some features may not
be included.
1.6.3
Band Pane and Tabs
The upper area of each selected pane shows the tabs corresponding to that pane.
Item
Description / Values
Alarms
Displays various alarms generated by the Repeater and
enables monitoring. See section
Control and
Params
Used for adjusting RF parameters and channel
config
section
Band Info
Shows information on the current band. See section
5.2.2
Backup and
Restore
Configuration files management options (configuration
files can be stored on the Repeater for access). See
section
PS NFPA REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
UMCD00013 Rev 2.2 ©
Axell Wireless Ltd
Operation Buttons
The following Operation buttons are available.
Description / Values
Click to save changes
–
before exiting the screen; otherwise,
changes will not be saved.
Click to refresh the current screen and update the displayed
Click to reset the Web Access application. Use in case of failure
or display problems
Used to set the Repeater clock.
Shows the current access level.
Click Help to display an e
-
guide line for the system operation.
This Help is general by its nature and some features may not
Band Pane and Tabs
The upper area of each selected pane shows the tabs corresponding to that pane.
Description / Values
Displays various alarms generated by the Repeater and
enables monitoring. See section
6.2.
Used for adjusting RF parameters and channel
config
uration (signal level, gain and bandwidth). See
section
4.2.
Shows information on the current band. See section
5.2.2
Configuration files management options (configuration
files can be stored on the Repeater for access). See
section
5.3.
Axell Wireless Ltd
before exiting the screen; otherwise,
Click to refresh the current screen and update the displayed
Click to reset the Web Access application. Use in case of failure
guide line for the system operation.
This Help is general by its nature and some features may not
The upper area of each selected pane shows the tabs corresponding to that pane.
Displays various alarms generated by the Repeater and
uration (signal level, gain and bandwidth). See
Shows information on the current band. See section
Configuration files management options (configuration
files can be stored on the Repeater for access). See