User's Manual
Table Of Contents
- 1 INTRODUCTION
- 2 Antenna Requirements
- 3 Installing the Signal Booster
- 4 Battery Charger Description and Installation
- 4.1 Charger Ordering Information
- 4.2 Charger Architecture
- 4.3 Charger Interfaces
- 4.4 Charger Installation Procedure
- 5 Setup and Commissioning
- 6 Administrative Operations
- 7 Monitoring and Troubleshooting
- Appendix A – Booster and Charger Specifications
D-MBR 3707-3708 PS NFPA CLASS B SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless Cobham Wireless – Coverage
Date: 6-Set-15
Page | 64 Doc. No. 00060CDUM Rev. 1.0
7.5 Modifying Alarm Severities
The Alarms Configuration tab is used to modify the factory set level (minor, major or critical) of
specific alarms when they are activated.
To modify the Alarm Severities
From the left pane, select 700-800 item and choose the Alarms Configuration tab. When
activated due to a fault, the alarm is displayed in the selected color. The color corresponds to the
alarm level.
Each alarm can be set to one of the following levels: Minor (yellow), Major (orange) or Critical (red).
Figure 7-4. Modifying Alarm Severities