User's Manual
Table Of Contents
- 1 INTRODUCTION
- 2 Antenna Requirements
- 3 Installing the Signal Booster
- 4 Battery Charger Description and Installation
- 4.1 Charger Ordering Information
- 4.2 Charger Architecture
- 4.3 Charger Interfaces
- 4.4 Charger Installation Procedure
- 5 Setup and Commissioning
- 6 Administrative Operations
- 7 Monitoring and Troubleshooting
- Appendix A – Booster and Charger Specifications
D-MBR 3707-3708 PS NFPA CLASS B SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless Cobham Wireless – Coverage
Date: 6-Set-15
Page | 54 Doc. No. 00060CDUM Rev. 1.0
(Other fields provide version and identification information.)
Figure 6-4. CMU Level Info
6.2.2 Viewing Band Level Info
This Band Info tab displays general identification information such as build version, valid filter
definitions and more.
To access the Booster Information window
1. From the left pane, select the 700-800 item.
2. Select the Band Info tab. The relevant parameters are displayed. This includes:
• Build Version
• Filters types and relevant bandwidth – this information is relevant when defining the
RF parameters and sub-bands for each band.
Figure 6-5. Band Level Information