User's Manual
Table Of Contents
- 1 INTRODUCTION
- 2 Antenna Requirements
- 3 Installing the Signal Booster
- 4 Battery Charger Description and Installation
- 4.1 Charger Ordering Information
- 4.2 Charger Architecture
- 4.3 Charger Interfaces
- 4.4 Charger Installation Procedure
- 5 Setup and Commissioning
- 6 Administrative Operations
- 7 Monitoring and Troubleshooting
- Appendix A – Booster and Charger Specifications
D-MBR 3707-3708 PS NFPA CLASS B SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless Cobham Wireless – Coverage
Date: 6-Set-15
Page | 12 Doc. No. 00060CDUM Rev. 1.0
3.3 Booster Unpacking and Package Contents
Upon receiving the D-MBR-PS-NFPA Signal Booster, perform the following:
1. Examine the shipping container for damage before unpacking the unit.
2. Perform a visual inspection to reveal any physical damage to the equipment.
3. Verify that all of the items listed in the packing list are included. Otherwise contact yourCobham
Wireless service representative.
Booster Package Contents
Item Description
D-MBR Booster
CD containing User’s Manual
and USB driver
Mounting Brackets
1 x Alarms Connector
Circular 8 Pin (P/N 30WEC70500)
DC Cable
Additional (supplied)
installation components:
Qty. Description
4x
M8x12 bolts for securing the Booster to the
brackets
1x Insex tool for bolts
1 x key