User's Manual

Axell D-MBR 3007-3008-PS-NFPA

PRODUCT DESCRIPTION AND USER’S MANUAL

4.4 Configuring the External Alarms

Any connected external alarms (section 3.9) must be enabled and configured according

to the instructions provided in this section.

To configure external alarms

1. Click on CMU in the tree pane and select the External Alarms tab. The following

dialog appears.

Figure 4-6. External Alarm Configuration Dialog

2. For each connected alarm:

• Checkmark the Active checkbox.

• Verify the alarm Normal Mode is set to Low.

• Set the alarm Severity as Critical, Major or Minor

• In the Description field, assign the alarm an identifiable name (e.g. Door

open).

NOTE: Triggered external alarms are displayed in the Axell-CMU-Alarms tab.

Click CMU

External

Alarms tab