User Manual

A XELL D-MBR-USA R EPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd 17
3.10 Power Connections
The Repeater operates from the power source. The power consumption is Max 320W for 3 bands, Max
400W for 4 bands .
WARNING! Electrical Shock
A. To prevent electrical shock when installing or modifying the system power wiring,
disconnect the wiring at the power source before working with uninsulated wires or
terminals.
B. The AC input should be supplied on a 10A dual pole circuit breaker protected line
with 3mm contact gap suitable for the end application.
1. Connect the GND.
2. Locate the 110/220V AC power outlet.
3. Connect the AC power cable to the Repeaters front panel Power connector.
AC Power
connector