User's Manual

AXELL 3307D REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd 47
Appendix: 3307D Specifications
RF Per Band
Parameters DL UL
Frequency Range (MHz) L728-746
U746-757
L698-716
U776-787
Selectable Sub-Bands
(Model dependent)
8 to 12 (model dependent)* 8 or 12 (model dependent)*
Passband Gain (max) 82 ±2 dB dB 82 ±2 dB dB
Passband Ripple
2dB p-p max for BW<10MHz
4dB p-p max for BW≥10MHz
2dB p-p max for BW<10MHz
4dB p-p max for BW≥10MHz
Gain Adjust Range (in 1dB steps) 0-25 dB 0-25 dB
Composite Output Power +33dBm +27dBm
Attenuation range 0 to 30 dB, in 1 dB step 0 to 30 dB, in 1 dB step
Noise Figure @ Maximum Gain (typical) 5 dB 4 dB
Propagation Delay < 6 µsec < 6 µsec
Channel Allocation Adjustable, Non Contiguous
Conformance Standard ETSI EN 300 609-4, GSM11.26, 3GPP TS 25.106
*Supports any BW option 2.5 MHz - 20 MHz in 2.5MHz step by setting the start-stop frequency
Power Supply
Note: Unit is connected to main AC outlet, where the AC voltage is converted to DC (via AC to DC
converter preassembled on the bracket) for connection to the unit front panel DC connector.
Parameter Description
Power Supply AC
110V-220V 50/60Hz
Power Consumption Max 120 W
Total RF Input Power (No Damage) + 10 dBm
Impedance Level 50 Ohm
Mechanical Specifications
Parameter
Description
Size W x H x D
305 mm x 375 x 205 mm (12” x 14.8” x 8.1”)
Weight
14Kg (30.8 lbs) max.
Environmental Specifications
Parameter Description
Environmental conditions
IP65
Operating temperature
-10 to +50
°
C (14 to +122
°
F)
Storage temperature
-40°F to 185°F (-40°C to +85°C)
Humidity
85%