User Manual

XELL

D-MBR-USA

EPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

36 Axell Wireless Ltd

4.8 Configuring Notification Method - SNMP Trap

or SMS

The Repeater can be configured provide fault notification either by sending traps to defined IP

addresses or by sending an SMS message to configured destinations (only one option can be

selected).

4.8.1 Configuring SNMP Trap Destinations

You may configure traps to be sent to five destination addresses each time a fault is triggered. The

traps are sent at the defined heartbeat frequency.

To set SNMP Trap Destination parameters

1. In the Use Destination field, select the SNMP option

2. For each destination:

• Enter the IP Address (where the IP addresses should be in the same subnet as the

repeater).

• Define the Community names (default = public) of the computers to which traps will

be sent.

3. In the SNMP Trap Configuration area, in the Heartbeat Period field, define the frequency (in

minutes) at which traps will be sent.

NOTE: It is recommended to maintain the Enterprise ID as Axell.

4. Click Send.

Select SNMP option from drop-

down list

Define up to five SNMP destination

addresses