User Manual

A XELL D-MBR-USA R EPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd 31
To assign the unit IP address
1. Access the CMU Configuration tab according to section 4.6.1.
2. To assign the unit addresses:
• Local address - in the IP Configuration area, assign the unit the IP address, Netmask
and Gateway parameters provided by your system administrator.
• DHCP server address – checkmark the option Request Additional DHCP Address.
The assigned address can be seen in the DHCP Address field.
4.7 Modem Communication Setup
This section describes how to access the modem communication settings. The following sections
describe how to configure for specific communication requirements: packet switch (GSM/GPRS or
CDMA), Direct Circuit Switch (GSM/GPRS only) or other settings.
To access the modem settings
Click the Communication Configuration tab and in the Modem area choose Communication field
as illustrated below (the options are described in the following table).