User Manual

A XELL D-MBR-USA R EPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
10 Axell Wireless Ltd
3.2 Overview of the Installation Procedure
NOTE: The Donor and Mobile antennas can be positioned and installed (without connection to the
Repeater) at any time either before or after mounting the Repeater.
1. Unpack the Repeater kit.
2. Install the Repeater in the rack
3. For GPRS modems only: Open the Repeater and insert the SIM card. (CDMA modems do NOT
required SIM cards).
4. Before powering up the Repeater:
• Verify isolation between the donor and mobile antennas
• Verify link between the BTS and Base Repeater.
5. Connect the antennas to the Repeater
6. GND and Power-up the Repeater.
7. Optional - Connect the dry-contact alarms. This can be done at any time, before or after
powering up the Repeater.
3.3 Required Tools and Materials
• Standard professional tool box (not supplied)
3.4 Unpacking
Upon receiving the D-MBR-USA, perform the following:
1. Examine the shipping container for damage before unpacking the unit.
2. Perform a visual inspection to reveal any physical damage to the equipment.
3. Verify that all of the equipment (listed below) is included. Otherwise contact Axell Wireless Ltd.
• D-MBR-USA Repeater
• AC power cable
• Alarms cable
• Ethernet cross cable – for setup connection between computer and Repeater
• RS232 cable for CDMA modem setup
• CD with documentation