User Manual

A XELL D-MBR-USA R EPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd 5
1.4 Axell D-MBR-USA Interfaces
The repeater’s interfaces are located on the front panel. These include Ethernet port, Mobile and
Base antenna connections, Alarm I/O, LED indicators, and power connection
Figure 2. D-MBR-USA Front Panel
The following table provides a description of the front panel ports and connections.
Interface Description
ETHERNET RJ45 Ethernet port for Web management.
MOBILE Service antenna RF connection. See section 3.8
BASE Donor antenna RF connection. See section 3.8
COUPLERS MOBILE
SMA Female Mobile coupling connectors (-20 dB). Used to test
input signals from the Base and Mobile antennas.
ALARM OUT Dry-contact alarm port for external alert devices. See section 3.11.
GPS N/A
POWER Connection to 110/220VAC.
GND Ground connection
Unit AC power
connection
Mobile/Service
antenna connection
LED indicators
corresponding to each service
Ethernet connection
Dry contact alarms port
Base/Donor
antenna connection
Coupler Mobile
GND