User Manual

Axell BSR 3308-PS NFPA
Product Description and User’s Manual
56 Doc PN 4000004131 Rev. 2.7 © Axell Wireless Ltd
Appendix A: Specifications
This section provides the electrical, mechanical and environmental specifications of the Axell
BSR 3308 PS and BSR PS-NFPA.
Electrical Downlink Uplink
Frequency Range
1 851 - 869 MHz 806 - 824 MHz
Passband Gain 85 dB 85 dB
Passband Ripple ± 1.5 dB ± 1.5 dB
Gain Attenuation Range (in 1 dB steps) 0 to 25 dB (in 1dB steps) 0 to 25dB (in 1dB steps)
FCC Composite Power: (in accordance
with FCC product measurements).
33 dBm 27 dBm
IC Rated Power: (the rated power is
equivalent to the Pmean power measured
with a two tone test in accordance with
Industry Canada procedures).
30dBm 25 dBm
Noise Figure @ Max. Gain (typical) 5 dB 5 dB
Propagation Delay < 5 µsec < 5 µsec
1
3 Selectable and tunable sub-bands are standard
General
Power Supply 220/110 VAC or 48VDC
Power Consumption 120W
Total RF Input Power (no damage) +10 dBm
RF Connector N-type, Female
V.S.W.R 1.7:1
Compliance FCC – please refer to new FCC guidelines at the
beginning of this document.
Environmental
Operating Temperature -20º C to + 50º C
Storage Temperature -30º C to + 80º C
Humidity 10% - 90% (condensed)
Dimensions L x W x H 13.78” x 18.11” x 5.7” (350 mm x 460 x 145 mm)
Weight 28.8 lbs (13kg) max.
Weatherproof IP-65, NEMA-4