User Manual

Axell BSR 3308-PS NFPA
Product Description and User’s Manual
52 Doc PN 4000004131 Rev. 2.7 © Axell Wireless Ltd
6.2.2 Alarms Screen
This section provides a description of each alarm and of the indicator colors.
6.2.2.1 Alarm Description
The following table provides a description of the alarms displayed in the Alarms screen.
Alarm Description and probable cause Recommendation
Power Below
Threshold
Malfunction in the Downlink path
– caused by the output power
being less than the minimum
threshold limit
Check the Max Power
Value in the Controls and
Parameters.
PAmp Current DL/UL Malfunction in UL/DL path.
Probable cause: Power amplifier
module consumes low/high
current.
Check the Repeater LEDs.
Section above.
Channeler Current
DL/UL
Malfunction in UL/DL path.
Probable cause: channeler unit
current consumption.
Check the Repeater LEDs.
Section above.
RSSI DL/UL Malfunction in UL/DL path
caused by a excessively high
input signal
Check the Repeater LEDs.
Section above.
VSWR DL/UL Indicates problem at the Mobile
or Donor antenna.
Problem with connection at
Mobile/Donor antenna
port, with the cable or with
antenna.
Temperature High unit temperature Check the Repeater case
for external causes (sun,
hot environment, air flow
is blocked) and eliminate
the reason for excessive
heat.
Caution: Do not cool with
water.