User Manual

Axell BSR 3308-PS NFPA
Product Description and User’s Manual
50 Doc PN 4000004131 Rev. 2.7 © Axell Wireless Ltd
6 Maintenance and Troubleshooting
This section provides the maintenance and troubleshooting procedures for the Repeater.
6.1 Periodic Maintenance
There is no periodic maintenance required for the Repeater. As long as it is installed in a
shaded area not subject to extreme temperatures and with adequate ventilation, it will
provide long term, problem-free operation.
6.2 Failure Display
Axell 3308-PS NFPA provides two modes for failure display:
• Status LEDs in Repeater
• Alarms screen in Web GUI
• Alarms Log
• Display of external dry-contact alarms
6.2.1 Status LEDs on the Repeater Front Panel
The Repeater includes three LED status indicators (DL and Power) located on the front
panel.
Check the following normal LEDs status on the front panel of the Repeater:
• At turn on, the LEDs show the built-in test procedures: the LEDs turn from Orange to
Red to Green.
• During normal operation, all LEDs are green
• LEDs in Red signify major malfunction. Orange displays high input power. Blinking
Green shows low power transmission.
LED Status
indicators