User Manual
Table Of Contents
- 1 Introduction
- 2 Antenna Requirements
- 3 Installing the Repeater
- 4 Initial Setup and Commissioning
- 5 Administration
- 6 Maintenance and Troubleshooting
- Appendix A: Specifications
Axell BSR 3308-PS NFPA
Product Description and User’s Manual
© Axell Wireless Ltd Doc PN 4000004131 Rev. 2.7 47
5.4 Backup/Restore of Repeater Configuration
The BSR 3308 Web GUI management application enables the backup and restore of the
repeater configuration files. The procedures are performed via the Backup/Restore
tab.
A number of configuration files can be stored on the Repeater for access at any time.
You can perform the following operations:
• Backup of the currently active configuration
• Restoring a previously saved file
• Uploading a configuration file from another location to the Repeater
• Downloading a configuration file from the Repeater to another location
To access Backup/Restore tab
1. From the Tree Pane, select the Axell3308 item.
2. Select the Backup/Restore tab. The following tab appears.
NOTE: The following figure is only an example of the Backup/Restore tab.
The following table provides a description of the available options (buttons) in the
Backup /Restore tab shown above.
Button Description
Backup Backup the currently running configuration file
Remark User defined name that will be assigned to the file saved using the
Backup file. (Instead of the system assigned name).
Restore Activates the system with the selected file.
Delete Deletes the selected file.
Refresh Refreshes the displayed list of files.
Upload
Enables uploading a configuration file from another location to the