User Manual
Table Of Contents
- 1 Introduction
- 2 Antenna Requirements
- 3 Installing the Repeater
- 4 Initial Setup and Commissioning
- 5 Administration
- 6 Maintenance and Troubleshooting
- Appendix A: Specifications
Axell BSR 3308-PS NFPA
Product Description and User’s Manual
46 Doc PN 4000004131 Rev. 2.7 © Axell Wireless Ltd
5.3.2 Band Module Software Upgrade
The procedure described in this section is used to upgrade the repeater's software (GUI
and other software updates).
To Upgrade the Repeater SW
1. From the Tree Pane, select Axell3308.
2. Select the Software Upgrade tab. The SW Upgrade screen shown below appears.
3. Browse for the relevant software provided.
4. Click on Upload.