User Manual
Table Of Contents
- 1 Introduction
- 2 Antenna Requirements
- 3 Installing the Repeater
- 4 Initial Setup and Commissioning
- 5 Administration
- 6 Maintenance and Troubleshooting
- Appendix A: Specifications
Axell BSR 3308-PS NFPA
Product Description and User’s Manual
© Axell Wireless Ltd Doc PN 4000004131 Rev. 2.7 43
5.2 Repeater Level and Band Level Information
Viewing The Web GUI provides Repeater level information (via the CMU Info tab) and
band level information (via the Band Info tab).
5.2.1 Repeater Level Information
Use the CMU Info screen to view the hardware and software versions of the Axell
Repeater and to assign the Repeater a recognizable name.
To access the Band Information window
1. From the Tree Pane, select Axell3308.
2. Select the Axell-CMU Info tab. The relevant parameters are displayed.
3. Use the Log Level to set the minimum fault level that is logged. Other fields provide
version and identification information.