User Manual
Table Of Contents
- 1 Introduction
- 2 Antenna Requirements
- 3 Installing the Repeater
- 4 Initial Setup and Commissioning
- 5 Administration
- 6 Maintenance and Troubleshooting
- Appendix A: Specifications
Axell BSR 3308-PS NFPA
Product Description and User’s Manual
© Axell Wireless Ltd Doc PN 4000004131 Rev. 2.7 37
4.6 Configuring the System Parameters
The Communication Configuration tab provides the IP and SNMP trap configuration
parameters.
This section describes how to access the dialog. The following sub-sections provide
detailed information on each configuration option:
4.6.1 The Communication Configuration Tab
To access the Communication Configuration tab
In the left tree pane, click CMU. From the available tabs in the work area, choose the
Communication Configuration tab.
NOTE: Not all tab areas are relevant.
Local and DHCP (two)
IP Address settings
SNMP trap
destination
s
Trap sending
frequency
Communication
= Fixed IP